Functionalized graphene–epoxy nanocomposites: experimental investigation of viscoelastic and viscoplastic behaviors

ÇOLAK ÇAKIR ÖZGEN ÜMİT, Birkan Besim, BAKBAK OKAN, ACAR ALPEREN, UZUNSOY DENİZ , Yayın Yeri: Mechanics of Time-Dependent Materials , 2023

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttps://link.springer.com/journal/11043/volumes-and-issues/27-1

Mechanical and tribological characterization of graphene nanoplatelets/Al2O3 reinforced epoxy hybrid composites

KAYKILARLI CANTEKİN, YEPREM HASİBE AYGÜL, UZUNSOY DENİZ , Yayın Yeri: Fullerenes, Nanotubes and Carbon Nanostructures , 2023

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttps://www.tandfonline.com/loi/lfnn20

Fabrication of functionally graded few-layered graphene reinforced Al-4.5Cu alloy by powder metallurgy

BORAND GÖKÇE, UZUNSOY DENİZ , Yayın Yeri: Elsevier BV , 2022

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://dx.doi.org/10.1016/j.jallcom.2022.166348

ALUMINIUM OXIDE (Al2O3)-FEW LAYER GRAPHENE (FLG) REINFORCED ALUMINIUM HYBRID COMPOSITES

KAYKILARLI CANTEKİN, altınışık zehra, Kılıç Enver Can, UZUNSOY DENİZ, YEPREM HASİBE AYGÜL , Yayın Yeri: Composites Theory and Practice , 2022

UluslararasıHakemliEmerging Sources Citation IndexÖzgün Makalehttps://kompozyty.ptmk.net/pliczki/pliki/1392_2022t02_cantekin-kaykilarli-zehra-.pdf

Few-layered graphene reinforced Al-10 wt% Si-2 wt% Cu matrix composites

ŞENYURT BERK, KÜÇÜKELYAS BURAK, Bellek Mustafa, Kavak Sina, BORAND GÖKÇE, UZUNSOY DENİZ, AĞAOĞULLARI DUYGU, AKÇAMLI NAZLI , Yayın Yeri: Elsevier BV , 2022

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://dx.doi.org/10.1016/j.jmrt.2022.09.049

Processing and Characterization of Al-4Cu Matrix Composites Reinforced with Few Layered Graphene

KAYKILARLI CANTEKİN, KÜÇÜKELYAS BURAK, AKÇAMLI NAZLI, UZUNSOY DENİZ, CANSEVER NURHAN , Yayın Yeri: Springer Science and Business Media LLC , 2022

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://dx.doi.org/10.1007/s12666-022-02606-5

Functionalized graphene–epoxy nanocomposites: experimental investigation of viscoelastic and viscoplastic behaviors

ÇOLAK ÇAKIR ÖZGEN ÜMİT, Birkan Besim, BAKBAK OKAN, ACAR ALPEREN, UZUNSOY DENİZ , Yayın Yeri: Springer Science and Business Media LLC , 2022

UluslararasıHakemliSCIÖzgün Makalehttp://dx.doi.org/10.1007/s11043-021-09530-z

Structural characterization of graphene nanostructures produced via arc discharge method

BORAND GÖKÇE, AKÇAMLI NAZLI, UZUNSOY DENİZ , Yayın Yeri: Ceramics International , 2021

UluslararasıHakemliSSCIÖzgün Makalehttp://dx.doi.org/10.1016/j.ceramint.2020.11.158

Experimental investigation of oligo cyclic compression behavior of pure epoxy and graphene-epoxy nanocomposites

ÇOLAK ÇAKIR ÖZGEN ÜMİT, UZUNSOY DENİZ, Bahlouli Nadia, Franc Charles , Yayın Yeri: Polymer Bulletin , 2021

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://dx.doi.org/10.1007/s00289-020-03453-4

High strain rate behavior of graphene-epoxy nanocomposites

ÇOLAK ÇAKIR ÖZGEN ÜMİT, Bahlouli Nadia, UZUNSOY DENİZ, Francart Charles , Yayın Yeri: POLYMER TESTING , 2020

UluslararasıHakemliSCIÖzgün Makalehttps://www.sciencedirect.com/sdfe/reader/pii/S0142941819311705/pdf

Boron and nitrogen doping in graphene: an experimental and density functional theory (DFT) study

KAYKILARLI CANTEKİN,UZUNSOY DENİZ,ŞAM PARMAK EBRU DEVRİM,FELLAH MEHMET FERDİ,ÇOLAK ÇAKIR ÖZGEN ÜMİT , Yayın Yeri: Nano Express , 2020

UluslararasıHakemliEndekste taranmıyorÖzgün Makalehttps://iopscience.iop.org/article/10.1088/2632-959X/ab89e9

Investigation of microstructural, mechanical and corrosion properties of graphene nanoplatelets reinforced Al matrix composites

AKÇAMLI NAZLI,KÜÇÜKELYAS BURAK,KAYKILARLI CANTEKİN,UZUNSOY DENİZ , Yayın Yeri: Materials Research Express , 2019

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttps://iopscience.iop.org/article/10.1088/2053-1591/ab511f

Suggestion of an Indicator to Evaluate Material Deposition in Resistance Spot Welding: Weld–Surface Interaction Index

Kinagu Melih,Gökçe Mehmet,Ateş Fatih,KÜÇÜKELYAS BURAK,MUTLU MUSTAFA,Erhuy Cemil Günhan,UZUNSOY DENİZ , Yayın Yeri: Journal of Materials Engineering and Performance , 2018

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttps://doi.org/10.1007/s11665-018-3535-z

Development of High Purity, Few-Layer Graphene Synthesis by Electric Arc Discharge Technique

çotul uğur,ŞAM PARMAK EBRU DEVRİM,KAYKILARLI CANTEKİN,SARAY ONUR,ÇOLAK ÖZGEN ÜMİT,UZUNSOY DENİZ , Yayın Yeri: Acta Physica Polonica A , 2018

UluslararasıHakemliSCIÖzgün Makalehttp://dx.doi.org/10.12693/aphyspola.134.289

Design Manufacture and Performance Test of A Reciprocating Refrigeration Compressor

KARA YUSUF ALİ, UZUNSOY DENİZ, LEKESİZ HÜSEYİN, AYDENİZ MUSTAFA GÜRKAN , Yayın Yeri: Hittite Journal of Science Engineering , 2018

UluslararasıHakemliTR DİZİNÖzgün Makalehttps://www.hjse.hitit.edu.tr/hjse/index.php/HJSE/article/view/HJSE19030000115

Investigation of Mechanical Properties of Graphene and Reduced Graphene Oxide Reinforced Epoxy Matrix Composites

topal emre,ŞAM PARMAK EBRU DEVRİM,ÇOLAK ÖZGEN ÜMİT,UZUNSOY DENİZ , Yayın Yeri: JOURNAL OF TESTING AND EVALUATION , 2017

UluslararasıHakemliSCI-ExpandedÖzgün Makale

Processing and characterization of graphene nano platelet GNP reinforced aluminum matrix composites

AKÇAMLI NAZLI,Gökçe Hasan,UZUNSOY DENİZ , Yayın Yeri: Materials Testing , 2016

UluslararasıHakemliSCI-ExpandedÖzgün Makale

Synthesis and Characterisation of Graphene Epoxy Nanocomposites

ACAR ALPEREN,ÇOLAK ÖZGEN ÜMİT,UZUNSOY DENİZ , Yayın Yeri: Materials Testing , 2015

UluslararasıHakemliSCI-ExpandedÖzgün Makale

Comparison of fatigue crack growth rate of selective lased sintered Rapidtseel via computational fracture mechanics

OKYAR ALİ FETHİ,UZUNSOY DENİZ,Özsoy Burak , Yayın Yeri: International Journal of Materials Research , 2014

UluslararasıHakemliSCI-ExpandedÖzgün Makale

Prediction of Wear Behavior of Aluminum AlloyReinforced with Carbon Nanotubes Using NonlinearIdentification

İstif İlyas,Işın Övün,UZUNSOY DENİZ,Peng Tao,Chang Isaac , Yayın Yeri: SAE Technical Paper 2014-01-0947 , 2014

UluslararasıHakemliEngineering IndexÖzgün Makale

Investigation of Dry Sliding Wear Behaviour of B4C Particulate Reinforced Mg Matrix Composites

Feray Güleryüz,OZAN SERTAN,UZUNSOY DENİZ,İPEK RASİM , Yayın Yeri: ACTA PHYSICA POLONICA A , 2014

UluslararasıHakemliSCI-ExpandedÖzgün Makale

Investigation of Wear Behavior of Aluminum Alloy Reinforced with Carbon Nanotubes

UZUNSOY DENİZ,Tao Peng,Isaac Chang,İSTİF İLYAS , Yayın Yeri: SAE Int. J. Mater. Manuf. , 2014

UluslararasıHakemliEngineering IndexÖzgün Makale

A Comparison and Identification Study of Dry SlidingWear Behaviour of Al B4CP and Mg B4CP Composites forAutomobile Disk Brakes

IŞIN ÖVÜN,İstif İlyas,UZUNSOY DENİZ,Güleryüz Feray , Yayın Yeri: SAE Technical Paper 2014-01-0944 , 2014

UluslararasıHakemliEngineering IndexÖzgün Makale

Synthesis and Characterisation of Aluminium Nanoparticles by Electric Arc Technique

Başar Yanık,Ağustos Haluk,İpek Yeliz,Koyun Ahmet,UZUNSOY DENİZ , Yayın Yeri: ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , 2013

UluslararasıHakemliSCI-ExpandedÖzgün Makale

Accuracy Comparison of ARX and ANFIS Model of PM Brake Lining Wear Behavior

IŞIN ÖVÜN,İSTİF İLYAS,UZUNSOY ERDEM,UZUNSOY DENİZ , Yayın Yeri: SAE Technical Paper , 2013

UluslararasıHakemliEngineering IndexÖzgün Makale

Identification of Dry Sliding Wear Behavior of B4CP Particulate Reinforced Mg Matrix Composites for Automobile Disk Brakes

İSTİF İLYAS,IŞIN ÖVÜN,UZUNSOY ERDEM,UZUNSOY DENİZ , Yayın Yeri: SAE Technical Paper , 2013

UluslararasıHakemliEngineering IndexÖzgün Makale

Characterisation of magnesium matrix composite reinforced with SiC particulates manufactured by powder metallurgy method

OZAN SERTAN,Güleryüz Feray,UZUNSOY DENİZ,İPEK RASİM , Yayın Yeri: International Journal of Surface Science and Engineering , 2012

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://www.inderscience.com/link.php?id=46850

An investigation of the microstructure and mechanical properties of B4C reinforced PM magnesium matrix composites

Güleryüz Feray,İPEK RASİM,OZAN SERTAN,UZUNSOY DENİZ , Yayın Yeri: Powder Metallurgy and Metal Ceramics , 2012

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://link.springer.com/10.1007/s11106-012-9455-9

Non Linear Modelling of PM Brake Lining Wear Behavior

İSTİF İLYAS,IŞIN ÖVÜN,UZUNSOY ERDEM,UZUNSOY DENİZ , Yayın Yeri: Materials Testing , 2012

UluslararasıHakemliSCI-ExpandedÖzgün Makale

Production Of B4C Reinforced Magnesium Metal Matrix Composites By Powder Metallurgy

Feray Güleryüz,OZAN SERTAN,İPEK RASİM,UZUNSOY DENİZ , Yayın Yeri: Usak University Journal of Material Sciences , 2012

UluslararasıHakemliEngineering IndexÖzgün Makale

Investigation of dry sliding wear properties of boron doped powder metallurgy 316L stainless steel

UZUNSOY DENİZ , Yayın Yeri: Materials & Design , 2010

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://linkinghub.elsevier.com/retrieve/pii/S026130691000155X

Linear Model for PM Brake Lining MaterialWear Behavior

İSTİF İLYAS,IŞIN ÖVÜN,UZUNSOY ERDEM,UZUNSOY DENİZ , Yayın Yeri: Materials Testing , 2010

UluslararasıHakemliSCI-ExpandedÖzgün Makale

Contribution of MoS2 additives to the Microstructure and Properties of PM Copper Based Brake Linings

UZUNSOY DENİZ,KELEŞOĞLU ERGÜN,ERARSLAN YAMAN , Yayın Yeri: Materials Testing , 2009

UluslararasıHakemliSCI-ExpandedÖzgün Makale

Effect of Al2O3 and B4C particle additions on the microstructure of PM copper based brake linings

UZUNSOY DENİZ , Yayın Yeri: Powder Metallurgy , 2008

UluslararasıHakemliSCI-ExpandedÖzgün Makale

Characterization of Boron Doped 316L Powder Metallurgy PM Stainless Steel

UZUNSOY DENİZ,YEPREM HASİBE AYGÜL , Yayın Yeri: MATERIALS TESTING-MATERIALS AND COMPONENTS TECHNOLOGY AND APPLICATION , 2008

UluslararasıHakemliSCI-ExpandedÖzgün Makale

The characterisation of PM 304 stainless steel sintered in the presence of a copper based additive

UZUNSOY DENİZ , Yayın Yeri: Materials Letters , 2007

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://linkinghub.elsevier.com/retrieve/pii/S0167577X06004514

The effect of infiltrant choice on the microstructure and mechanical properties of Rapidsteel2 0

UZUNSOY DENİZ,Chang Isaac , Yayın Yeri: Materials Letters , 2005

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://linkinghub.elsevier.com/retrieve/pii/S0167577X05004027

Fracture Behaviour of Selective Laser Sintered Rapidsteel Under Static and Dynamic Loading

UZUNSOY DENİZ,Chang Isaac,Bowen Paul , Yayın Yeri: Materials Science and Technology , 2003

UluslararasıHakemliSCI-ExpandedÖzgün Makale

Microstructural Evolution and Mechanical Properties of Rapidsteel

UZUNSOY DENİZ,Isaac Chang,Paul Bowen , Yayın Yeri: Powder Metallurgy , 2002

UluslararasıHakemliSCI-ExpandedÖzgün Makale

Chromium Carbide Coating of Steels by Thermoreactive Diffusion Process

TOPUZ AHMET,UZUNSOY DENİZ , Yayın Yeri: Practische Metallography , 1999

UluslararasıHakemliSCI-ExpandedÖzgün Makale

Investigation of Microstructure and Mechanical Electrochemical Behaviors of Martensitic Stainless Steel (MSS) and Alloyed White Cast Iron (WCI) Rolls Fabricated by a Centrifugal Casting

Oktay Mehmet,Taşçı Efe,KÜÇÜKELYAS BURAK,UZUNSOY DENİZ , Yayın Yeri: Journal of Innovative Science and Engineering , 2021

UlusalHakemliEndekste taranmıyorÖzgün Makale