Effect of Double Austenitization and Pre-Annealing Heat Treatment on the Microstructural and Mechanical Properties of QT 41Cr4 Steel

ÇELTİK CANSU, AYHAN İSMAİL İRFAN, YÜREKTÜRK YAKUP , Yayın Yeri: Transactions of the Indian Institute of Metals , 2023

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://dx.doi.org/10.1007/s12666-023-02975-5

Sıcak daldırma alüminyumlama (SDA) ve difüzyon tavlaması ile yüzeyi modifiye edilmiş Ti-6Al-4V alaşımının karakterizasyonu

YÜREKTÜRK YAKUP , Yayın Yeri: Journal of the Faculty of Engineering and Architecture of Gazi University , 2023

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://dx.doi.org/10.17341/gazimmfd.1009881

Surface characteristics of plasma electrolytic oxidation coatings on Cp-Ti and hot-dip aluminised Cp-Ti

ÇELTİK CANSU, YÜREKTÜRK YAKUP, GECÜ RIDVAN, KABOĞLU CİHAN, MUHAFFEL FAİZ , Yayın Yeri: Transactions of the IMF , 2022

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://dx.doi.org/10.1080/00202967.2022.2058108

Effect of diffusion annealing on duplex coated pure titanium produced by hot-dip aluminizing and micro-arc oxidation

YÜREKTÜRK YAKUP , Yayın Yeri: Surface and Coatings Technology , 2022

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://dx.doi.org/10.1016/j.surfcoat.2022.128170

Impact performances and failure modes of glass fiber reinforced polymers in different curvatures and stacking sequences

KABOĞLU CİHAN, EKEN TAHA YASİN, YÜREKTÜRK YAKUP , Yayın Yeri: SAGE Publications , 2022

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://dx.doi.org/10.1177/00219983211059096

Influence of Electrolyte Compositions and Electrical Parameters on Thermal Properties of Micro-Arc Oxidized AZ91 Alloy

SELVİ EKİN, MUHAFFEL FAİZ, YÜREKTÜRK YAKUP, VANLI ALİ SERDAR, BAYDOĞAN MURAT , Yayın Yeri: Journal of Materials Engineering and Performance , 2022

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://dx.doi.org/10.1007/s11665-021-06292-0

The Use of Twisting and Tightening Tool to Strengthen the Cerclage and Tension Band Wiring

UYGUR MEHMET ESAT,YAYLA MEHMET ALİ,YÜREKTÜRK YAKUP,AKPINAR FUAT , Yayın Yeri: Surgical Innovation , 2021

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://dx.doi.org/10.1177/1553350620965332

Modification of Cold-Sprayed Aluminum Coating on Nickel-Aluminum Bronze by Micro-Arc Oxidation

YÜREKTÜRK YAKUP , Yayın Yeri: Journal of Thermal Spray Technology , 2021

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://dx.doi.org/10.1007/s11666-021-01209-8

Investigation of indentation and dry sliding wear behaviour of Al-12.6 wt.% Si-10 wt.% TiB2 composites produced by sequential milling and pressureless sintering

TEKOĞLU EMRE,YÜREKTÜRK YAKUP,AĞAOĞULLARI DUYGU,DİLAWARY SHAİKH ASAD ALİ,BAYDOĞAN MURAT,ÖVEÇOĞLU MUSTAFA LUTFİ , Yayın Yeri: International Journal of Materials Research , 2019

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://dx.doi.org/10.3139/146.111830

Characterization of mechanically alloyed and pressureless sintered Al-7 wt% Si-2 wt% LaB6-2 wt% (MoSi2, WSi2) hybrid composites

TEKOĞLU EMRE,YÜREKTÜRK YAKUP,AĞAOĞULLARI DUYGU,OVALI DÖNDAŞ DİDEM,MERTDİNÇ SIDDIKA,ÖVEÇOĞLU MUSTAFA LUTFİ , Yayın Yeri: Advanced Powder Technology , 2019

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://dx.doi.org/10.1016/j.apt.2019.08.010

Improving wear resistance of 304 stainless steel reinforced AA7075 aluminum matrix composite by micro-arc oxidation

GECÜ RIDVAN, YÜREKTÜRK YAKUP, TEKOĞLU EMRE, MUHAFFEL FAİZ, KARAASLAN AHMET , Yayın Yeri: Surface and Coatings Technology , 2019

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://dx.doi.org/10.1016/j.surfcoat.2019.04.029

Effect of aluminizing and austempering processes on structural, mechanical and wear properties of a SSF ductile iron

YÜREKTÜRK YAKUP,BAYDOĞAN MURAT , Yayın Yeri: Materials Research Express , 2019

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://dx.doi.org/10.1088/2053-1591/aae804

Characterization of LaB6 particulate-reinforced eutectic Al-12.6 wt% Si composites fabricated via mechanical alloying and spark plasma sintering

TEKOĞLU EMRE,AĞAOĞULLARI DUYGU,YÜREKTÜRK YAKUP,BULUT BERRAK,ÖVEÇOĞLU MUSTAFA LUTFİ , Yayın Yeri: Powder Technology , 2018

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://dx.doi.org/10.1016/j.powtec.2018.09.055

Characterization of ferritic ductile iron subjected to successive aluminizing and austempering

YÜREKTÜRK YAKUP,BAYDOĞAN MURAT , Yayın Yeri: Surface and Coatings Technology , 2018

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://dx.doi.org/10.1016/j.surfcoat.2018.04.083

Estimating volume fractions of microstructural constituents in austempered high silicon alloyed GJS 600-10 ductile iron through magnetic measurements (VSM)

YÜREKTÜRK YAKUP,BAYDOĞAN MURAT , Yayın Yeri: Materials Science Forum , 2017

UluslararasıHakemliScopusÖzgün Makale

Effect of Microstructural Features on Mechanical and Magnetic Properties of Austempered High-silicon Ductile Irons

YÜREKTÜRK YAKUP,BAYDOĞAN MURAT , Yayın Yeri: ISIJ International , 2017

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://dx.doi.org/10.2355/isijinternational.isijint-2017-167

Characterization of micro arc oxidized 6082 aluminum alloy in an electrolyte containing carbon nanotubes

YÜREKTÜRK YAKUP,MUHAFFEL FAİZ,BAYDOĞAN MURAT , Yayın Yeri: Surface and Coatings Technology , 2015

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://dx.doi.org/10.1016/j.surfcoat.2014.12.058

Characterization and wear properties of carbon nanotubes incorporated ceramic coatings on Ti6Al4V and Ti6Al7Nb alloy

YAZICI SELİM KAAN,MUHAFFEL FAİZ,YÜREKTÜRK YAKUP,BAYDOĞAN MURAT , Yayın Yeri: Journal of Achievements in Materials and Manufacturing Engineering , 2014

UluslararasıHakemliEndekste taranmıyorÖzgün Makale

Effect of Process Parameters on the Surface Properties of Micro Arc Oxidized 6082 Aluminum Alloy

YÜREKTÜRK YAKUP, MUHAFFEL FAİZ, BAYDOĞAN MURAT , Yayın Yeri: Academic Journal of Science , 2013

UluslararasıHakemliEndekste taranmıyorÖzgün Makalehttp://www.universitypublications.net/ajs/0202/html/P3G241.xml