Açık dikey tip soğutucu teşhir dolabın faz değiştiren malzeme kullanılarak enerji verimliliğinin sayısal ve deneysel olarak incelenmesi

Çelik Ayşe Burcu, PULAT ERHAN, SÖKMEN KEMAL FÜRKAN, Balkan Çağrı, COŞKUN SALİH , Yayın Yeri: Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi , 2023

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttps://dergipark.org.tr/tr/pub/gazimmfd/issue/75069/984026

Investigation of Tricklevent Innovative Passive Facade Ventilation System in Terms of Thermal Comfort and Energy Saving

SÖKMEN KEMAL FÜRKAN, ERGÜNER BURHAN, AKIN İLKNUR , Yayın Yeri: Avrupa Bilim ve Teknoloji Dergisi , 2022

UluslararasıHakemliTR DİZİNÖzgün Makalehttp://dx.doi.org/10.31590/ejosat.1130037

Cooling of Heated Blocks with Triangular Guide Protrusions Simulating Printed Circuit Boards

Beyazoğlu Ebubekir, YÜCE BAHADIR ERMAN, Ateş Murat, YALINDAĞ RÜMEYSA, SÖKMEN KEMAL FÜRKAN, PULAT ERHAN , Yayın Yeri: Sustainability , 2022

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://dx.doi.org/10.3390/su142315856

Computatıonal And Teorıc Investıgatıon Of The Effects Of Fınned Trıcklevent System On Buıldıng Energy Savıngs

SÖKMEN KEMAL FÜRKAN, ERGÜNER BURHAN, Akın İlknur , Yayın Yeri: Journal of Scientific Reports-A , 2022

UluslararasıHakemliTR DİZİNÖzgün Makale

YER ALTI ARAÇ OTOPARKLARINDA JET FAN TİPİ VE FARKLI HAVA DEĞİŞİM SAYILARINA GÖRE YANGIN SENARYOSUNUN HESAPLAMALI AKIŞKANLAR DİNAMİĞİ İLE İNCELENMESİ

Bakır Mustafa Sinan, SÖKMEN KEMAL FÜRKAN , Yayın Yeri: Uludag University Journal of the Faculty of Engineering , 2022

UluslararasıHakemliTR DİZİNÖzgün Makalehttp://dx.doi.org/10.17482/uumfd.1109224

Condensation Zone Estimation and Determination and Comparison of Condensation by Numerical Analysis in Vehicle Lighting System

SÖKMEN KEMAL FÜRKAN, Kocabıyık Erol, Meşeci Yunus, Rençber Onur , Yayın Yeri: European Journal of Science and Technology , 2022

UluslararasıHakemliTR DİZİNÖzgün Makalehttp://dx.doi.org/10.31590/ejosat.1173732

Numerical Comparison of Original Design and Finned Natural Convection with Forced Convection in LED Cooling in a Sample Fog Light

Bayraktar M.Emre, KARAGÖZ İRFAN, SÖKMEN KEMAL FÜRKAN, Kocabıyık Erol, Mercan Mehmet, Ergin Ali , Yayın Yeri: European Journal of Science and Technology , 2022

UluslararasıHakemliTR DİZİNÖzgün Makalehttp://dx.doi.org/10.31590/ejosat.1173709

Thermal optimization of intercellular distance in lithium-ion batteries and numerical analysis of the original honeycomb metal integrated battery pack

KARATAŞ OSMAN BEDRETTİN, SÖKMEN KEMAL FÜRKAN , Yayın Yeri: Journal of Energy Storage , 2022

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://dx.doi.org/10.1016/j.est.2022.105705

Numerical and Experimental Investigation of the Effects of Thermal Expansion and Pressure Loss in Air Hoses made from Different Materials

ÇAKIR ASLIHAN, SÖKMEN KEMAL FÜRKAN , Yayın Yeri: The European Journal of Research and Development , 2022

UluslararasıHakemliAdvanced Sciences Index, Directory of Research Journals Indexing, Eurasian Scientific Journal Index, Google Scholar, CiteFactorÖzgün Makalehttp://dx.doi.org/10.56038/ejrnd.v2i2.86

EXPERIMENTAL AND NUMERICAL ANALYSIS OF THE EFFECT OF COMPONENTS ON A DOUBLE-SIDED PCB ON LED JUNCTION TEMPERATURE AND LIGHT OUTPUT USING CFD

KARATAŞ OSMAN BEDRETTİN, SÖKMEN KEMAL FÜRKAN , Yayın Yeri: ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , 2020

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttps://link.springer.com/article/10.1007/s13369-020-04455-0

Research Into The Junction Temperature And Power Of New Led Modules Generation In Dependence On Variable Parameters

SÖKMEN KEMAL FÜRKAN, KARATAŞ OSMAN BEDRETTİN , Yayın Yeri: Light & Engineering","Issue 05-2020 , 2020

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://dx.doi.org/10.33383/2019-101

Investigation of Air Flow Characteristics in Air Intake Hoses using CFD and Experimental Analysis based on Deformation of Rubber Hose Geometry

SÖKMEN KEMAL FÜRKAN,KARATAŞ OSMAN BEDRETTİN , Yayın Yeri: Journal of Applied Fluid Mechanics , 2020

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://jafmonline.net/web/guest/home?p_p_id=JournalArchive_WAR_JournalArchive_INSTANCE_nvhnp_p_action=0p_p_state=maximizedp_p_mode=viewp_p_col_id=column-2p_p_col_pos=3p_p_col_count=6_JournalArchive_WAR_JournalArchive_INSTANCE_nvhn_form_page=main_form

Review of Batteries Thermal Problems and Thermal Management Systems

SÖKMEN KEMAL FÜRKAN,Çavuş Muhammed , Yayın Yeri: Journal of Innovative Science and Engineering (JISE) , 2017

UluslararasıHakemliTR DİZİNDerleme Makalehttp://jise.btu.edu.tr/tr/pub/issue/38671/449388

Performance analysis of a re circulating heat pump dryer

YAMANKARADENİZ NURETTİN,SÖKMEN KEMAL FÜRKAN,PULAT ERHAN,COŞKUN SALİH,KAYNAKLI ÖMER,PASTAKKAYA BİLSAY , Yayın Yeri: Thermal Science , 2016

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://www.doiserbia.nb.rs/Article.aspx?ID=0354-98361400069Y

INVESTIGATION OF HEAT TRANSFER TYPES IN AN AUTOMOBILE FOG LAMP WITH COMPUTATIONAL FLUID DYNAMIC ANALYSIS

SÖKMEN KEMAL FÜRKAN,YAMANKARADENİZ NURETTİN,COŞKUN SALİH , Yayın Yeri: Light Engineering , 2016

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttps://l-e-journal.com/en/journals/light-engineering-24-4/light-engineering-24-4-electronic-version/

Computational thermal analysis of cylindrical fin design parameters and a new methodology for defining fin structure in LED automobile headlamp cooling applications

SÖKMEN KEMAL FÜRKAN,YÜRÜKLÜ EMRAH,YAMANKARADENİZ NURETTİN , Yayın Yeri: Applied Thermal Engineering , 2016

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://linkinghub.elsevier.com/retrieve/pii/S1359431115011163

LED JUNCTION AND HEATSINK NUMBER CALCULATION WITH COMPUTATIONAL FLUIDS DYNAMIC CFD

SÖKMEN KEMAL FÜRKAN,PULAT ERHAN,YAMANKARADENİZ NURETTİN,COŞKUN SALİH , Yayın Yeri: ISI Bilimi ve Teknigi Dergisi-Journal of Thermal Science and Technology , 2015

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttps://dergipark.org.tr/tr/pub/isibted/issue/33972/376011

Thermal computations of temperature distribution and bulb heat transfer in an automobile headlamp

SÖKMEN KEMAL FÜRKAN, PULAT ERHAN, YAMANKARADENİZ NURETTİN, COŞKUN SALİH , Yayın Yeri: Heat and Mass Transfer , 2014

UluslararasıHakemliSCIÖzgün Makalehttp://link.springer.com/10.1007/s00231-013-1229-5

An Investigation of Thermal Comfort for Mold, Welding and Turning Technicians and the Effects on Performance in Naturally Ventilated Area

SÖKMEN KEMAL FÜRKAN , Yayın Yeri: Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi , 2019

UlusalHakemliTR DİZİNÖzgün Makalehttp://dergipark.gov.tr/doi/10.16984/saufenbilder.430811

DOĞAL YOL İLE HAVALANDIRILAN BİR SANAYİ KURULUŞUNDA ISIL KONFOR İNCELEMESİ VE GİYSİ FAKTÖRÜ, METABOLİK ORAN, ÇALIŞAN AĞIRLIĞININ KONFORA ETKİLERİNİN ARAŞTIRILMASI

SÖKMEN KEMAL FÜRKAN , Yayın Yeri: Uludağ University Journal of The Faculty of Engineering , 2018

UlusalHakemliTR DİZİNÖzgün Makalehttp://dergipark.gov.tr/doi/10.17482/uumfd.397735