Experiment-Based Design of Stirling Cryocooler Compressor Using Response-Controlled Testing

GÜÇYILMAZ ÇETİN SUNA,Karaağaçlı Taylan,ERTAŞ AHMET HANİFİ , Yayın Yeri: Vibration , 2025

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttps://doi.org/10.3390/vibration8010004

A Predictive Model for Fatigue Performance in Spot Welded and Bolted Joints

TEKE İBRAHİM TALHA,BAYKARA CELALETTİN,AKBULUT MUSTAFA,ERTAŞ AHMET HANİFİ , Yayın Yeri: Iranian Journal of Science and Technology, Transactions of Mechanical Engineering , 2025

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttps://doi.org/10.1007/s40997-025-00908-9

Integrating prestress simulation and literature insights to assess mold design effects in sand-cast components

TEKE İBRAHİM TALHA,ERTAŞ AHMET HANİFİ , Yayın Yeri: Journal of Intelligent Manufacturing and Special Equipment , 2025

UluslararasıHakemliEBSCOÖzgün Makalehttps://doi.org/10.1108/jimse-06-2025-0012

Studying the Connection Between Fatigue Life and Modal Characteristic in Composite Structures Having Geometrical Singularities

AKBULUT MUSTAFA,ERTAŞ AHMET HANİFİ , Yayın Yeri: Mechanics of Composite Materials , 2025

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttps://doi.org/10.1007/s11029-025-10311-9

Fatigue Resistance in Engineering Components: A Comprehensive Review on the Role of Geometry and Its Optimization

TEKE İBRAHİM TALHA,ERTAŞ AHMET HANİFİ , Yayın Yeri: Computer Modeling in Engineering & Sciences , 2025

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttps://doi.org/10.32604/cmes.2025.066644

Pre-stress-integrated FEA for failure prediction in 3D-printed and injection-molded polymers

TEKE İBRAHİM TALHA,ERTAŞ AHMET HANİFİ , Yayın Yeri: Multidiscipline Modeling in Materials and Structures , 2025

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttps://doi.org/10.1108/mmms-03-2025-0090

Mechanical behavior control in cranial implant cells via structural optimization: a path to sensitivity management

TEKE İBRAHİM TALHA,ERTAŞ AHMET HANİFİ , Yayın Yeri: Journal of Intelligent Manufacturing and Special Equipment , 2025

UluslararasıHakemliEBSCOÖzgün Makalehttps://doi.org/10.1108/jimse-04-2025-0005

Experimental assessment of fatigue life and fracture modes in MTS-based bolted joints

Altıngeyik Kerim,TEKE İBRAHİM TALHA,ERTAŞ AHMET HANİFİ , Yayın Yeri: Railway Sciences , 2025

UluslararasıHakemliScopusÖzgün Makalehttps://doi.org/10.1108/rs-05-2025-0013

Fatigue Testing and Life Prediction of Tensile Shear Spot-Welded Joints: A Comprehensive Review with Regression Modeling

TEKE İBRAHİM TALHA,ERTAŞ AHMET HANİFİ , Yayın Yeri: Iranian Journal of Science and Technology, Transactions of Mechanical Engineering , 2025

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttps://doi.org/10.1007/s40997-025-00859-1

Hybrid Framework for Structural Analysis: Integrating Topology Optimization, Adjacent Element Temperature-Driven Pre-Stress, and Greedy Algorithms

TEKE İBRAHİM TALHA,ERTAŞ AHMET HANİFİ , Yayın Yeri: Computers, Materials & Continua , 2025

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttps://doi.org/10.32604/cmc.2025.066086

Enhancing structural analysis efficiency: a comprehensive review and experimental validation of advanced submodeling techniques, introducing the submodeling-density-shape-element removal (S-D-S-ER) method

TEKE İBRAHİM TALHA,ERTAŞ AHMET HANİFİ , Yayın Yeri: Engineering Computations , 2024

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttps://doi.org/10.1108/ec-03-2024-0188

Design optimization of a well-known geometry for minimum weight utilizing the Density-Shape-Element Removal method (D-S-ER)

TEKE İBRAHİM TALHA,ERTAŞ AHMET HANİFİ , Yayın Yeri: E3S Web of Conferences , 2024

UluslararasıHakemliDOAJ, EBSCO, Proquest, Scopus, CAS, Thomson ReutersÖzgün Makalehttps://doi.org/10.1051/e3sconf/202450804015

Microstructure and Surface Roughness Connection on Machined Ductile Iron: An Experimental Determination

TEKE İBRAHİM TALHA,OKTAY MEHMET,BAYKARA CELALETTİN,ERTAŞ AHMET HANİFİ , Yayın Yeri: E3S Web of Conferences , 2024

UluslararasıHakemliDOAJ, EBSCO, Proquest, Scopus, CAS, Thomson ReutersÖzgün Makalehttps://doi.org/10.1051/e3sconf/202447700003

Investigation on strength loss in buckling of composite columns subjected to fatigue loading

AKBULUT MUSTAFA,YILMAZ YASİN,ERTAŞ AHMET HANİFİ , Yayın Yeri: Journal of the Brazilian Society of Mechanical Sciences and Engineering , 2024

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttps://doi.org/10.1007/s40430-024-04773-6

An Experimental Study on Nodular Iron Machined Surfaces Utilizing a Capable 2D Finite Element Model for Precise Surface Roughness Estimation

TEKE İBRAHİM TALHA,ERTAŞ AHMET HANİFİ , Yayın Yeri: Processes , 2024

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttps://doi.org/10.3390/pr12030549

Effects of the single-lap joint on fatigue strength of metals with different surface coatings: a numerical simulation

BAYKARA CELALETTİN, TEKE İBRAHİM TALHA, ERTAŞ AHMET HANİFİ , Yayın Yeri: EDP Sciences , 2023

UluslararasıHakemliEBSCO, Scopus, DOAJ, etc.Özgün Makalehttp://dx.doi.org/10.1051/e3sconf/202340211011

A New Hybrid Method, Density-Shape-Element Removal (D-S-ER), for the Optimization of Continuum Structures

TEKE İBRAHİM TALHA, YILMAZ YASİN, BAYKARA CELALETTİN, ERTAŞ AHMET HANİFİ , Yayın Yeri: MECHANICS OF SOLIDS , 2023

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://dx.doi.org/10.3103/s0025654423600769

Establishing reduced thermal mathematical model (RTMM) for a space equipment: an integrative review

Akbulut Mustafa, ERTAŞ AHMET HANİFİ , Yayın Yeri: Aircraft Engineering and Aerospace Technology , 2022

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://dx.doi.org/10.1108/aeat-08-2021-0245

A Comparative Study on Fatigue Life Prediction of Spot Welded Coach Peel (CP) and Modified Coach Peel (MCP) Type Test Specimens

Akbulut Mustafa, ERTAŞ AHMET HANİFİ , Yayın Yeri: Lecture Notes in Mechanical Engineering","Proceedings of the 8th International Conference on Fracture, Fatigue and Wear , 2021

UluslararasıHakemliSCOPUS, INSPEC, Norwegian Register for Scientific Journals and Series, SCImago, WTI Frankfurt eG, zbMATHÖzgün Makalehttp://dx.doi.org/10.1007/978-981-15-9893-7_32

A Fatigue-Reliability Analysis of Spot Welded Modified Tensile Shear (MTS) Specimens

ERTAŞ AHMET HANİFİ, Akbulut Mustafa , Yayın Yeri: Lecture Notes in Mechanical Engineering","Proceedings of the 8th International Conference on Fracture, Fatigue and Wear , 2021

UluslararasıHakemliSCOPUS, INSPEC, Norwegian Register for Scientific Journals and Series, SCImago, WTI Frankfurt eG, zbMATHÖzgün Makalehttp://dx.doi.org/10.1007/978-981-15-9893-7_31

An Experimental Investigation into the Fatigue Behavior of Spot Welded Tensile Shear (TS) Specimens

ERTAŞ AHMET HANİFİ, Akbulut Mustafa , Yayın Yeri: Lecture Notes in Mechanical Engineering","Proceedings of the 8th International Conference on Fracture, Fatigue and Wear , 2021

UluslararasıHakemliSCOPUS, INSPEC, Norwegian Register for Scientific Journals and Series, SCImago, WTI Frankfurt eG, zbMATHÖzgün Makalehttp://dx.doi.org/10.1007/978-981-15-9893-7_30

Experimental study on fatigue performance of resistance spot-welded sheet metals

ERTAŞ AHMET HANİFİ, Akbulut Mustafa , Yayın Yeri: The International Journal of Advanced Manufacturing Technology , 2021

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://dx.doi.org/10.1007/s00170-021-06822-z

Genetic algorithm based reference current control extraction based shunt active power filter

Sundaram Elango, Gunasekaran Manavaalan, Krishnan Ramakrishnan, Padmanaban Sanjeevikumar, Chenniappan Sharmeela, ERTAŞ AHMET HANİFİ , Yayın Yeri: International Transactions on Electrical Energy Systems , 2021

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://dx.doi.org/10.1002/2050-7038.12623

BOLD: Bio-Inspired Optimized Leader Election for Multiple Drones

Ganesan Rajesh, Raajini X. Mercilin, Nayyar Anand, Sanjeevikumar Padmanaban, Hossain Eklas, ERTAŞ AHMET HANİFİ , Yayın Yeri: SENSORS , 2020

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttps://www.mdpi.com/1424-8220/20/11/3134

An investigation of non-linear optimization methods on composite structures under vibration and buckling loads

Akbulut Mustafa, Saraç Abdulhamit, ERTAŞ AHMET HANİFİ , Yayın Yeri: Advances in Computational Design , 2020

UluslararasıHakemliE-SCI, SCOPUSÖzgün Makalehttp://www.techno-press.org/content/?page=article&journal=acd&volume=5&num=3&ordernum=1

Design optimization of a fixed wing aircraft

Yayli Ugur C,Kimet Cihan,DURU ANDAY,Cetir Ozgur,Torun Ugur,Aydogan Ahmet C,Padmanaban Sanjeevikumar,ERTAŞ AHMET HANİFİ , Yayın Yeri: Advances in Aircraft and Spacecraft Science , 2017

UluslararasıHakemliE-SCI, SCOPUSÖzgün Makale

High-Voltage DC-DC Converter Topology for PV Energy Utilization—Investigation and Implementation

Padmanaban Sanjeevikumar,Blaabjerg Frede,Wheeler Patrick W,Ojo Joseph Olorunfemi,ERTAŞ AHMET HANİFİ , Yayın Yeri: ELECTRIC POWER COMPONENTS AND SYSTEMS , 2017

UluslararasıHakemliSCI-ExpandedÖzgün Makale

Speed sensorless vector control of parallel-connected three-phase two-motor single-inverter drive system

Ramachandiran Gunabalan,Padmanaban Sanjeevikumar,Blaabjerg Frede,Wheeler Patrick W,Ojo Joseph Olorunfemi,ERTAŞ AHMET HANİFİ , Yayın Yeri: FACETS , 2016

UluslararasıHakemliSCOPUSÖzgün Makale

A bio-inspired novel optimization technique for reactive power flow

Christy Ananthy,Raj Perianayagam Ajay D Vimal,Padmanaban Sanjeevikumar,Selvamuthukumaran Rajasekar,ERTAŞ AHMET HANİFİ , Yayın Yeri: Engineering Science and Technology, an International Journal , 2016

UluslararasıHakemliSCIÖzgün Makale

Analysis of wavelet controller for robustness in electronic differential of electric vehicles: an investigation and numerical developments

Daya JL Febin,Padmanaban Sanjeevikumar,Blaabjerg Frede,Wheeler Patrick W,Ojo Joseph Olorunfemi,ERTAŞ AHMET HANİFİ , Yayın Yeri: ELECTRIC POWER COMPONENTS AND SYSTEMS , 2016

UluslararasıHakemliSCI-ExpandedÖzgün Makale

A solar PV water pumping solution using a three-level cascaded inverter connected induction motor drive

Ramulu Chinthamalla,Padmanaban Sanjeevikumar,Karampuri Ramsha,Jain Sachin,ERTAŞ AHMET HANİFİ,Fedak Viliam , Yayın Yeri: Engineering Science and Technology, an International Journal , 2016

UluslararasıHakemliSCIÖzgün Makale

Dual MPPT algorithm for dual PV source fed open-end winding induction motor drive for pumping application

Jain Sachin,Ramulu Chinthamalla,Padmanaban Sanjeevikumar,Ojo Joseph Olorunfemi,ERTAŞ AHMET HANİFİ , Yayın Yeri: Engineering Science and Technology, an International Journal , 2016

UluslararasıHakemliSCIÖzgün Makale

Wavelet-fuzzy speed indirect field oriented controller for three-phase AC motor drive–Investigation and implementation

Padmanaban Sanjeevikumar,Daya JL Febin,Blaabjerg Frede,Wheeler Patrick W,Szczeniak Pawel,Oleschuk Valentin,ERTAŞ AHMET HANİFİ , Yayın Yeri: Engineering Science and Technology, an International Journal , 2016

UluslararasıHakemliSCIÖzgün Makale

Numerical implementation of wavelet and fuzzy transform IFOC for three-phase induction motor

Padmanaban Sanjeevikumar,Daya JL Febin,Blaabjerg Frede,MirNasiri Nazim,ERTAŞ AHMET HANİFİ , Yayın Yeri: Engineering Science and Technology, an International Journal , 2016

UluslararasıHakemliSCIÖzgün Makale

A clinically feasible kinematic assessment method of upper extremity motor function impairment after stroke

ÖZTÜRK ALİ,TARTAR AHMET,ERSÖZ HÜSEYİNSİNOĞLU BURCU,ERTAŞ AHMET HANİFİ , Yayın Yeri: MEASUREMENT , 2016

UluslararasıHakemliSCI-ExpandedÖzgün Makale

Brain tumor detection using monomodal intensity based medical image registration and MATLAB.

IRMAK EMRAH,ERÇELEBİ ERGUN,ERTAŞ AHMET HANİFİ , Yayın Yeri: Turkish Journal of Electrical Engineering and Computer Sciences , 2016

UluslararasıHakemliSCI-ExpandedÖzgün Makale

Analysis of enhancement in available power transfer capacity by STATCOM integrated SMES by numerical simulation studies

Ananthavel Saraswathi,Padmanaban Sanjeevikumar,Shanmugham Sutha,Blaabjerg Frede,ERTAŞ AHMET HANİFİ,Fedak Viliam , Yayın Yeri: Engineering Science and Technology, an International Journal , 2016

UluslararasıHakemliSCIÖzgün Makale

Linear Switched Reluctance Motor for Water Aerator A Design for Application

Chokalingham N Lenin,Sanjeevikumar Padmanaban,Frede Blaabjerg,ERTAŞ AHMET HANİFİ , Yayın Yeri: International Journal of Analysis of Electrical Machines , 2015

UluslararasıHakemliEndekste taranmıyorÖzgün Makale

Design optimization of spot welded structures to attain maximum strength

ERTAŞ AHMET HANİFİ , Yayın Yeri: STEEL AND COMPOSITE STRUCTURES , 2015

UluslararasıHakemliSCI-ExpandedÖzgün Makale

DETERMINATION OF FATIGUE AND STATIC STRENGTH OF SCOTS PINE AND BEECH WOOD

YILDIRIM MEHMET NURİ,UYSAL BURHANETTİN,ÖZÇİFÇİ AYHAN,ERTAŞ AHMET HANİFİ , Yayın Yeri: WOOD RESEARCH , 2015

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://www.woodresearch.sk/wr/201504/16.pdf

Simulation-based fatigue life assessment of a mercantile vessel

ERTAŞ AHMET HANİFİ,YILMAZ AHMET FATİH , Yayın Yeri: Structural Engineering and Mechanics , 2014

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttps://doi.org/10.12989/sem.2014.50.6.835

Design optimization of fiber reinforced laminates for maximum fatigue life

ERTAŞ AHMET HANİFİ,SÖNMEZ FAZIL ÖNDER , Yayın Yeri: journal of composite materials , 2014

UluslararasıHakemliSCI-ExpandedÖzgün Makale

Creep simulation and comparison of micro CT based FE model of porcine and human cancellous bone

ERTAŞ AHMET HANİFİ , Yayın Yeri: COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING , 2013

UluslararasıHakemliSCIÖzgün Makalehttp://www.tandfonline.com/doi/full/10.1080/10255842.2013.815977#.UvaRnFhWE6Y

Optimization of Fiber Reinforced Laminates for a Maximum Fatigue Life by Using the Particle Swarm Optimization Part II

ERTAŞ AHMET HANİFİ , Yayın Yeri: MECHANICS OF COMPOSITE MATERIALS , 2013

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://link.springer.com/article/10.1007/s11029-013-9326-6

Optimization of fiber reinforced laminates for a maximum fatigue life by using the particle swarm optimization Part I

ERTAŞ AHMET HANİFİ , Yayın Yeri: MECHANICS OF COMPOSITE MATERIALS , 2013

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://link.springer.com/article/10.1007/s11029-013-9314-x

Simulation of creep in non homogenous samples of human cortical bone

ERTAŞ AHMET HANİFİ, Winwood Keith, Zioupos Peter, Cotton John R. , Yayın Yeri: Computer Methods in Biomechanics and Biomedical Engineering , 2012

UluslararasıHakemliSCIÖzgün Makalehttp://www.tandfonline.com/doi/abs/10.1080/10255842.2011.575069

Design optimization of spot welded plates for maximum fatigue life

ERTAŞ AHMET HANİFİ,SÖNMEZ FAZIL ÖNDER , Yayın Yeri: FINITE ELEMENTS IN ANALYSIS AND DESIGN , 2011

UluslararasıHakemliSCIÖzgün Makalehttp://apps.webofknowledge.com/full_record.do?product=WOSsearch_mode=GeneralSearchqid=18SID=V1E36n2gAlcodgE@@nhpage=1doc=1cacheurlFromRightClick=no

Design optimization of composite structures for maximum strength using direct simulated annealing

ERTAŞ AHMET HANİFİ, SÖNMEZ FAZIL ÖNDER , Yayın Yeri: PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE , 2011

UluslararasıHakemliSCIÖzgün Makalehttp://apps.webofknowledge.com/full_record.do?product=WOS&search_mode=GeneralSearch&qid=18&SID=V1E36n2gAlcodgE@@nh&page=1&doc=2&cacheurlFromRightClick=no

Optimization of spot weld joints

ERTAŞ AHMET HANİFİ, SÖNMEZ FAZIL ÖNDER , Yayın Yeri: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science , 2009

UluslararasıHakemliSCIÖzgün Makalehttp://apps.webofknowledge.com/full_record.do?product=WOS&search_mode=GeneralSearch&qid=18&SID=V1E36n2gAlcodgE@@nh&page=1&doc=6&cacheurlFromRightClick=no

Measurement and Assessment of Fatigue Life of Spot Weld Joints

ERTAŞ AHMET HANİFİ, VARDAR ÖKTEM, SÖNMEZ FAZIL ÖNDER, Solim Zafer , Yayın Yeri: JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME , 2009

UluslararasıHakemliSCIÖzgün Makalehttp://apps.webofknowledge.com/full_record.do?product=WOS&search_mode=GeneralSearch&qid=18&SID=V1E36n2gAlcodgE@@nh&page=1&doc=7&cacheurlFromRightClick=no

A parametric study on fatigue strength of spot weld joints

ERTAŞ AHMET HANİFİ,SÖNMEZ FAZIL ÖNDER , Yayın Yeri: FATIGUE FRACTURE OF ENGINEERING MATERIALS STRUCTURES , 2008

UluslararasıHakemliSCIÖzgün Makalehttp://apps.webofknowledge.com/full_record.do?product=WOSsearch_mode=GeneralSearchqid=18SID=V1E36n2gAlcodgE@@nhpage=1doc=8cacheurlFromRightClick=no

An investigation of the effect of the gap values between the overlap portions of the spot welded pieces on fatigue life

ERTAŞ AHMET HANİFİ,YILMAZ YASİN,BAYKARA CELALETTİN , Yayın Yeri: PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE , 2008

UluslararasıHakemliSCIÖzgün Makalehttp://apps.webofknowledge.com/full_record.do?product=WOSsearch_mode=GeneralSearchqid=18SID=V1E36n2gAlcodgE@@nhpage=1doc=9cacheurlFromRightClick=no