Built-up-edge Formation and its Effect on Surface Topography and Machinability Indicators in Sustainable Minimum Quantity Lubrication Turning of Al2024-T6

KUNTOĞLU MUSTAFA,BİNALİ RÜSTEM,DEMİRPOLAT HAVVA,Makhesana Mayur , Place of Publication: Journal of Materials Engineering and Performance , 2025

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttps://doi.org/10.1007/s11665-025-12313-z

A review on surface morphology and tribological behavior of titanium alloys via SLM processing

KUNTOĞLU MUSTAFA,SALUR EMİN,Gupta Munish Kumar,Waqar Saad,Szczotkarz Natalia,Vashishtha Govind,Krolczyk Grzegorz M.,KORKMAZ MEHMET ERDİ,ASLAN ABDULLAH,BİNALİ RÜSTEM , Place of Publication: Rapid Prototyping Journal , 2025

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttps://doi.org/10.1108/rpj-08-2024-0328

Statistical and experimental analysis of machining parameters and tool radius in turning of low carbon steels

Aydın Necmettin,YURTKURAN HAKAN,KUNTOĞLU MUSTAFA,BİNALİ RÜSTEM , Place of Publication: International Journal of Advanced Natural Sciences and Engineering Researches , 2025

UluslararasıHakemliIndex CopernicusÖzgün Makalehttps://as-proceeding.com/index.php/ijanser/article/view/2836/2704

Effect of Cooling/Lubrication Conditions on Machining Performance: An Experimental Investigation of 1040 Steel Under Dry, MQL, and Nano-MQL Environments

SALUR EMİN,Okcu Nursena,KORKMAZ MEHMET ERDİ,Kaya Kübra,BİNALİ RÜSTEM,ÇETİNKAL SALİH BİLAL , Place of Publication: Materials , 2025

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttps://doi.org/10.3390/ma18174063

Sustainable Lubrication Strategies in Eco-friendly Machining of AISI 4140 Steel: Performance and Environmental Impact Analysis Using Machine Learning

KUNTOĞLU MUSTAFA,DEMİRPOLAT HAVVA,BİNALİ RÜSTEM,KORKMAZ MEHMET ERDİ,Makhesana Mayur,Kaya Kübra , Place of Publication: Journal of Materials Engineering and Performance , 2025

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttps://doi.org/10.1007/s11665-025-11948-2

Dry Cutting Performance of M300 Maraging Steel: Effects of MachiningParameter Variations

Kaya Kübra,BİNALİ RÜSTEM , Place of Publication: International Journal of Advanced Natural Sciences and Engineering Researches , 2025

UluslararasıHakemliIndex CopernicusÖzgün Makalehttps://as-proceeding.com/index.php/ijanser/article/view/2798/2665

Machining of AISI 52100 Steel: Statistical Insights into Dry Environment with Variable Tool Nose Radius

Karabulut Songül,BİNALİ RÜSTEM,KORKMAZ MEHMET ERDİ,ÇETİN TAYFUN , Place of Publication: Doğu Fen Bilimleri Dergisi , 2025

UluslararasıHakemliICI Journals Master List - Index CopernicusÖzgün Makalehttps://doi.org/10.57244/dfbd.1708389

Review of advances and challenges in machining of metal matrix composites

da Silva Leonardo Rosa Ribeiro,Pereira Artur Camposo,Monteiro Sergio Neves,KUNTOĞLU MUSTAFA,BİNALİ RÜSTEM,Khan Aqip Mashood,Unune Deepak Rajendra,Pimenov Danil Yu , Place of Publication: Journal of Materials Research and Technology , 2025

UluslararasıHakemliSCI-ExpandedDerleme Makalehttps://www.sciencedirect.com/science/article/pii/S2238785425014401

Characterizing Machining Indicators with Machine Learning Models Under Cellulose Nanocrystal and Graphene-Based Nanofluid Conditions

KUNTOĞLU MUSTAFA,BİNALİ RÜSTEM,Makhesana Mayur , Place of Publication: Arabian Journal for Science and Engineering , 2025

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttps://doi.org/10.1007/s13369-025-10240-8

A Holistic Perspective on Sustainable Machining of Al6082: Synergistic Effects of Nano-Enhanced Bio-Lubricants

BİNALİ RÜSTEM,KORKMAZ MEHMET ERDİ,ÖZDEMİR MEHMET TAYYİP,GÜNAY MUSTAFA , Place of Publication: Machines , 2025

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttps://doi.org/10.3390/machines13040293

Machinability and Surface integrity of Glass Fiber Reinforced Plastic Composite: A Review

Pereira Artur Camposo,Monteiro Sergio Neves,da Silva Leonardo Rosa Ribeiro,BİNALİ RÜSTEM,KUNTOĞLU MUSTAFA,Machado Alisson Rocha,Pimenov Danil Yu , Place of Publication: Journal of Materials Research and Technology , 2025

UluslararasıHakemliSCI-ExpandedDerleme Makalehttps://doi.org/10.1016/j.jmrt.2025.02.215

Exploring the Tribological Performance of Mist Lubrication Technique on Machinability Characteristics During Turning S235JR Steel

BİNALİ RÜSTEM,DEMİRPOLAT HAVVA,KUNTOĞLU MUSTAFA,Kaya Kübra , Place of Publication: İmalat Teknolojileri ve Uygulamaları , 2024

UluslararasıHakemliTR DİZİNÖzgün Makale

The influences of alloying elements and processing conditions on the machinability of wrought aluminium alloys: A literature review

DEMİRPOLAT HAVVA,BİNALİ RÜSTEM,KUNTOĞLU MUSTAFA,SALUR EMİN,MAKHESANA MAYUR,Yaghoubi Saeed,USCA ÜSAME ALİ , Place of Publication: Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering , 2024

UluslararasıHakemliSCI-ExpandedDerleme Makale

Evaluation of drilling and hole quality characteristics in green machining aluminium alloys: A new approach towards green machining

Makhesana Mayur A.,Patel Kaushik M.,Ghetiya Nilesh,BİNALİ RÜSTEM,KUNTOĞLU MUSTAFA , Place of Publication: Journal of Manufacturing Processes , 2024

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://dx.doi.org/10.1016/j.jmapro.2024.08.059

A review on progress trends of machining of Carbon Fiber Reinforced Plastics

BİNALİ RÜSTEM,da Silva Leonardo Rosa Ribeiro,Pimenov Danil Yu,KUNTOĞLU MUSTAFA,Machado Alisson Rocha,Linul Emanoil , Place of Publication: Journal of Materials Research and Technology , 2024

UluslararasıHakemliSCI-ExpandedDerleme Makalehttp://dx.doi.org/10.1016/j.jmrt.2024.10.050

A Comprehensive Review on Low-Cost MEMS Accelerometers for Vibration Measurement: Types, Novel Designs, Performance Evaluation, and Applications

BİNALİ RÜSTEM,DEMİRPOLAT HAVVA,KUNTOĞLU MUSTAFA,Makhesana Mayur,Yaghoubi Saeed,SAYIN KUL BAHAR , Place of Publication: Journal of Molecular and Engineering Materials , 2024

UluslararasıHakemliESCIÖzgün Makalehttps://doi.org/10.1142/s225123732430002x

Finish turning of AISI 5140 tempered steel to improve machinability for engineering applications: An experimental approach with dry cutting

Yalçın Ali Çetin,Şen Fırat,Divleli Barış,Küçükçolak Tuncay,Menşan Cihan,BİNALİ RÜSTEM , Place of Publication: Doğu Fen Bilimleri Dergisi , 2024

UluslararasıHakemliICI Journals Master List - Index CopernicusÖzgün Makalehttp://dx.doi.org/10.57244/dfbd.1392858

Experimental and machine learning comparison for measurement the machinability of nickel based alloy in pursuit of sustainability

BİNALİ RÜSTEM , Place of Publication: Measurement , 2024

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://dx.doi.org/10.1016/j.measurement.2024.115142

Finite element analysis and statistical investigation of S960ql structure steel machinability with milling method

BİNALİ RÜSTEM,YALDIZ SÜLEYMAN,NEŞELİ SÜLEYMAN , Place of Publication: Journal of the Brazilian Society of Mechanical Sciences and Engineering , 2024

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://dx.doi.org/10.1007/s40430-024-04842-w

AISI 52100 Rulman Çeliğinin Tornalanmasında İşleme Parametrelerinin Yüzey Pürüzlülüğü, Kesme Sıcaklığı ve Kesme Kuvveti Üzerindeki Etkilerinin İncelenmesi

DEMİRPOLAT HAVVA,Kaya Kübra,BİNALİ RÜSTEM,KUNTOĞLU MUSTAFA , Place of Publication: İmalat Teknolojileri ve Uygulamaları , 2023

UluslararasıHakemliTR DİZİNÖzgün Makalehttp://dx.doi.org/10.52795/mateca.1393430

Monitoring Built-Up Edge, Chipping, Thermal Cracking, and Plastic Deformation of Milling Cutter Inserts through Spindle Vibration Signals

Jatakar Keshav, Shah Vasrha, BİNALİ RÜSTEM, SALUR EMİN, SAĞLAM HACI, Mikolajczyk Tadeusz, Patange Abhishek Dhananjay , Place of Publication: Machines , 2023

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://dx.doi.org/10.3390/machines11080790

A Review: Literature summary on typical machinability characterictics of milling processes

DEMİRPOLAT HAVVA, KUNTOĞLU MUSTAFA, BİNALİ RÜSTEM , Place of Publication: Sustainable Production, Instrumentation and Engineering Sciences , 2023

UluslararasıHakemliEndekste taranmıyorDerleme Makalehttp://dx.doi.org/10.57223/spies.2023.1.1.05

Comparison of Tool Wear, Surface Roughness, Cutting Forces, Tool Tip Temperature, and Chip Shape during Sustainable Turning of Bearing Steel

DEMİRPOLAT HAVVA,BİNALİ RÜSTEM,Patange Abhishek D.,Pardeshi Sujit S.,Gnanasekaran Sakthivel , Place of Publication: Materials , 2023

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://dx.doi.org/10.3390/ma16124408

Different Aspects of Machinability in Turning of AISI 304 Stainless Steel: A Sustainable Approach with MQL Technology

BİNALİ RÜSTEM, DEMİRPOLAT HAVVA, KUNTOĞLU MUSTAFA, SALUR EMİN , Place of Publication: Metals , 2023

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://dx.doi.org/10.3390/met13061088

Machinability Investigations Based on Tool Wear, Surface Roughness, Cutting Temperature, Chip Morphology and Material Removal Rate during Dry and MQL-Assisted Milling of Nimax Mold Steel

BİNALİ RÜSTEM, DEMİRPOLAT HAVVA, KUNTOĞLU MUSTAFA, SAĞLAM HACI , Place of Publication: Lubricants , 2023

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://dx.doi.org/10.3390/lubricants11030101

A Comprehensive Analysis of Surface Roughness, Vibration and Acoustic Emissions Based on Machine Learning during Hard Turning of AISI 4140 Steel

ASİLTÜRK İLHAN, KUNTOĞLU MUSTAFA, BİNALİ RÜSTEM, AKKUŞ HARUN, SALUR EMİN , Place of Publication: Metals , 2023

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://dx.doi.org/10.3390/met13020437

Indirect monitoring of machining characteristics via advanced sensor systems: a critical review

KORKMAZ MEHMET ERDİ, Gupta Munish Kumar, Li Zhixiong, Krolczyk Grzegorz M., KUNTOĞLU MUSTAFA, BİNALİ RÜSTEM, YAŞAR NAFİZ, Pimenov Danil Yu , Place of Publication: The International Journal of Advanced Manufacturing Technology , 2022

UluslararasıHakemliSCI-ExpandedDerleme Makalehttp://dx.doi.org/10.1007/s00170-022-09286-x

Research on Using an Unconventional Tool for Increasing Tool Life by Selective Exchange of Worn Cutting Edge

Mikolajczyk Tadeusz, Paczkowski Tomasz, KUNTOĞLU MUSTAFA, Patange Abhishek Dhananjay, BİNALİ RÜSTEM , Place of Publication: Applied Sciences , 2022

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://dx.doi.org/10.3390/app13010460

Energy Saving by Parametric Optimization and Advanced Lubri-Cooling Techniques in the Machining of Composites and Superalloys: A Systematic Review

BİNALİ RÜSTEM, Patange Abhishek Dhananjay, KUNTOĞLU MUSTAFA, Mikolajczyk Tadeusz, SALUR EMİN , Place of Publication: Energies , 2022

UluslararasıHakemliSCI-ExpandedDerleme Makalehttp://dx.doi.org/10.3390/en15218313

Advance monitoring of hole machining operations via intelligent measurement systems: A critical review and future trends

BİNALİ RÜSTEM, KUNTOĞLU MUSTAFA, Pimenov Danil Yu, USCA ÜSAME ALİ, Gupta Munish Kumar, KORKMAZ MEHMET ERDİ , Place of Publication: Measurement , 2022

UluslararasıHakemliSCI-ExpandedDerleme Makalehttp://dx.doi.org/10.1016/j.measurement.2022.111757

TOOLOX 44 MALZEMESİNDE TALAŞ KALDIRMA MİKTARININ YÜZEY PÜRÜZLÜLÜĞÜ VE TAKIM AŞINMASI ÜZERİNDEKİ ETKİLERİNİN İNCELENMESİ

BİNALİ RÜSTEM,ULAŞ HASAN BASRİ,DEMİR HALİL , Place of Publication: NWSA Academic Journals , 2018

UluslararasıHakemliDRJIÖzgün Makalehttp://dx.doi.org/10.12739/nwsa.2018.13.1.2a0132

An Investigation of Machinability of Hot Work Tool Steel Toolox 44 with Cutting Tools with Different Nose Radius Using Machine Learning

Kaya Kübra,ÇETİN TAYFUN,BİNALİ RÜSTEM,GÜNDOĞMUŞ HAKAN , Place of Publication: İmalat Teknolojileri ve Uygulamaları , 2025

UlusalHakemliTR DİZİNÖzgün Makalehttps://doi.org/10.52795/mateca.1644170

Finish turning of toolox 33 to improve machining parameters with different nose radius tools

Kaya Kübra,ÇETİN TAYFUN,BİNALİ RÜSTEM,GÜNDOĞMUŞ HAKAN , Place of Publication: EUROPEAN MECHANICAL SCIENCE , 2025

UlusalHakemliTR DİZİNÖzgün Makalehttps://dergipark.org.tr/en/pub/ems/issue/93923/1724270

Parametric Optimization of Cutting Force and Temperature in Finite Element Milling of AISI P20 Steel

BİNALİ RÜSTEM , Place of Publication: Journal of Materials and Mechatronics: A , 2023

UlusalHakemliTR DİZİNÖzgün Makalehttp://dx.doi.org/10.55546/jmm.1257453

Evaluation of Machining Parameters Affecting Cutting Forces in Dry Turning of GGG50 Ductile Cast Iron

BİNALİ RÜSTEM, KUNTOĞLU MUSTAFA , Place of Publication: Türk Doğa ve Fen Dergisi , 2023

UlusalHakemliTR DİZİNÖzgün Makalehttp://dx.doi.org/10.46810/tdfd.1210013

An Investigation of Power Consumption in Milling AISI P20 Plastic Mold Steel By Finite Elements Method

BİNALİ RÜSTEM,COŞKUN MÜCAHİT,NEŞELİ SÜLEYMAN , Place of Publication: European Journal of Science and Technology , 2022

UlusalHakemliDRJIÖzgün Makalehttp://dx.doi.org/10.31590/ejosat.1083257

Parametric optimization for machinability parameters of S960QL structural steel during milling by finite elements

BİNALİ RÜSTEM,YALDIZ SÜLEYMAN,NEŞELİ SÜLEYMAN , Place of Publication: Selcuk University Journal of Engineering Sciences , 2022

UlusalHakemliIndex CopernicusÖzgün Makalehttps://sujes.selcuk.edu.tr/sujes/article/view/584/785

Investigation of Power Consumption in the Machining of S960QL Steel by Finite Elements Method

BİNALİ RÜSTEM, YALDIZ SÜLEYMAN, NEŞELİ SÜLEYMAN , Place of Publication: European Journal of Technic , 2022

UlusalHakemliTR DİZİNÖzgün Makalehttp://dx.doi.org/10.36222/ejt.1066472

Machinability of CoCrMo Alloy used in Biomedical applications: Investigation of Cutting Tool Type

MUTLU BÜŞRA, BİNALİ RÜSTEM, DEMİRSÖZ RECEP, YAŞAR NAFİZ , Place of Publication: Gazi Journal of Engineering Sciences , 2022

UlusalHakemliTR DİZİNÖzgün Makalehttp://dx.doi.org/10.30855/gmbd.0705005

Use Of Powder Metallurgy Method in The Production of SiC Reinforced Cu-Al-Ni Composites and Characterization of The Production Result

KAÇAN HASAN, ASGAROV KHANGARDASH, ÇETİN TAYFUN, BİNALİ RÜSTEM , Place of Publication: Doğu Fen Bilimleri Dergisi , 2022

UlusalHakemliICI Journals Master List - Index CopernicusÖzgün Makalehttp://dx.doi.org/10.57244/dfbd.1196469

An In-Depth Analysis on The Surface Roughness Variations During Turning of GGG50 Ductile Cast Iron

BİNALİ RÜSTEM, KUNTOĞLU MUSTAFA , Place of Publication: Doğu Fen Bilimleri Dergisi , 2022

UlusalHakemliICI Journals Master List - Index CopernicusÖzgün Makalehttp://dx.doi.org/10.57244/dfbd.1200347

S960QL Yapı Çeliğinin İşlenebilirliğinin Sonlu Elemanlar Yöntemi ile İncelenmesi

BİNALİ RÜSTEM,YALDIZ SÜLEYMAN,NEŞELİ SÜLEYMAN , Place of Publication: European Journal of Science and Technology , 2021

UlusalHakemliTR DİZİNÖzgün Makalehttp://dx.doi.org/10.31590/ejosat.996324