Effect of Ti Addition Holding Time on Casting Quality and Mechanical Properties of A356 Alloy

GURTARAN MİKDAT,ULUDAĞ MUHAMMET , Place of Publication: SN Applied Sciences , 2020

UluslararasıHakemliE-SCIÖzgün Makalehttps://link.springer.com/article/10.1007/s42452-020-03659-1

A Statistical Assessment of Casting Quality-Tribological Properties of Eutectic Al-12Si Alloy: Effect of Mg

ULUDAĞ MUHAMMET , Place of Publication: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , 2020

UluslararasıHakemliSCI-ExpandedÖzgün Makale

Influence of Al-B grain refiner on porosity formation of directionally solidified Al-Si alloys

ULUDAĞ MUHAMMET , Place of Publication: China Foundry , 2020

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://link.springer.com/10.1007/s41230-020-0012-8

The Effect of Bifilm and Sr Modification on the Mechanical Properties of AlSi12Fe Alloy

ULUDAĞ MUHAMMET,GURTARAN MİKDAT,DIŞPINAR DERYA , Place of Publication: Archives of Foundry Engineering , 2020

UluslararasıHakemliE-SCIÖzgün Makale

Statistical analysis on the effect of the solidification rate and quenching mediums on mechanical properties in Etial 221 alloy

ULUDAĞ MUHAMMET,GEMİ LOKMAN,DIŞPINAR DERYA , Place of Publication: Uludağ University Journal of The Faculty of Engineering , 2020

UluslararasıHakemliTR DİZİNÖzgün Makalehttps://dergipark.org.tr/tr/download/article-file/1046255

Relationship Between Machinability, Microstructure, and Mechanical Properties of Al-7Si Alloy

ULUDAĞ MUHAMMET,YAZMAN ŞAKİR,GEMİ LOKMAN,BAKIRCIOĞLU BARIŞ,ERZİ ERAY,DIŞPINAR DERYA , Place of Publication: Journal of Testing and Evaluation , 2018

UluslararasıHakemliSCIÖzgün Makalehttp://www.astm.org/doiLink.cgi?JTE20170083

Experimental and statistical analysis of low velocity impact response of filament wound composite pipes

GEMİ LOKMAN,KAYRICI MEHMET,ULUDAĞ MUHAMMET,SOYLU GEMİ DİLEK,ŞAHİN ÖMER SİNAN , Place of Publication: Composites Part B-Engineering , 2018

UluslararasıHakemliSCIÖzgün Makalehttps://linkinghub.elsevier.com/retrieve/pii/S1359836818308801

Change in Porosity of A356 by Holding Time and Its Effect on Mechanical Properties

ULUDAĞ MUHAMMET,GEMİ LOKMAN,ÇETİN REMZİ,DIŞPINAR DERYA , Place of Publication: Journal of Materials Engineering and Performance , 2018

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://link.springer.com/10.1007/s11665-018-3534-0

Freezing Range, Melt Quality, and Hot Tearing in Al-Si Alloys

ULUDAĞ MUHAMMET,ÇETİN REMZİ,DIŞPINAR DERYA , Place of Publication: Metallurgical and Materials Transactions A , 2018

UluslararasıHakemliSCIÖzgün Makalehttp://link.springer.com/10.1007/s11661-018-4512-8

On the Interpretation of Melt Quality Assessment of A356 Aluminum Alloy by the Reduced Pressure Test: The Bifilm Index and Its Physical Meaning

ULUDAĞ MUHAMMET,ÇETİN REMZİ,DIŞPINAR DERYA,TİRYAKİOĞLU MURAT , Place of Publication: International Journal of Metalcasting , 2018

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://link.springer.com/10.1007/s40962-018-0217-4

The effects of degassing, grain refinement Sr-addition on melt quality-hot tear sensitivity relationships in cast A380 aluminum alloy

ULUDAĞ MUHAMMET,ÇETİN REMZİ,DIŞPINAR DERYA,TİRYAKİOĞLU MURAT , Place of Publication: Engineering Failure Analysis , 2018

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttps://linkinghub.elsevier.com/retrieve/pii/S1350630717312608

Correlation Between Machinability and Chip Morphology of Austempered Ductile Iron

YAZMAN ŞAKİR,GEMİ LOKMAN,ULUDAĞ MUHAMMET,AKDEMİR AHMET,UYANER MESUT,DIŞPINAR DERYA , Place of Publication: Journal of Testing and Evaluation , 2018

UluslararasıHakemliSCIÖzgün Makalehttp://www.astm.org/doiLink.cgi?JTE20160490

Effect of Degassing and Grain Refinement on Hot Tearing Tendency in Al8Si3Cu Alloy

ULUDAĞ MUHAMMET,ÇETİN REMZİ,DIŞPINAR DERYA,TİRYAKİOĞLU MURAT , Place of Publication: International Journal of Metalcasting , 2018

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://link.springer.com/10.1007/s40962-017-0197-9

Observation of hot tearing in Sr-B modified A356 alloy

ULUDAĞ MUHAMMET,ÇETİN REMZİ,DIŞPINAR DERYA , Place of Publication: Archives Foundry Engineering , 2017

UluslararasıHakemliESCIÖzgün Makale

Effect of Sr and Ti addition on the corrosion behavior of Al-7Si-0.3Mg alloy

ULUDAĞ MUHAMMET,KOCABAŞ MUSTAFA,DIŞPINAR DERYA,ÇETİN REMZİ,CANSEVER NURHAN , Place of Publication: Archives Foundry Engineering , 2017

UluslararasıHakemliESCI: Emerging Sources Citation IndexÖzgün Makalehttp://www.afe.polsl.pl/index.php/en/4576/effect-of-sr-and-ti-addition-on-the-corrosion-behaviour-of-al-7si-0-3mg-alloy.pdf

Assessment of Mechanism of Pore Formation in Directionally Solidified A356 Alloy

ULUDAĞ MUHAMMET,DIŞPINAR DERYA , Place of Publication: Archives Foundry Engineering , 2017

UluslararasıHakemliESCIÖzgün Makalehttp://www.afe.polsl.pl/index.php/en/magazine/show/130/volume-17-issue-1-january-march-2017

The effect of 0.5 wt additions of carbon nanotubes ceramic nanoparticleson tensile properties of epoxy-matrix composites: a comparative study.

GEMİ LOKMAN,YAZMAN ŞAKİR,ULUDAĞ MUHAMMET,DIŞPINAR DERYA,TİRYAKİOĞLU MURAT , Place of Publication: Mater Sci Nanotechnol , 2017

UluslararasıHakemliGoogle ScholarÖzgün Makale

Characterization of the Effect of Melt Treatments on Melt Quality in Al-7wt Si-Mg Alloys

ULUDAĞ MUHAMMET,ÇETİN REMZİ,DIŞPINAR DERYA,TİRYAKİOĞLU MURAT , Place of Publication: Metals , 2017

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://www.mdpi.com/2075-4701/7/5/157

The Effect of Holding Time and Solidification Rate on Porosity of A356

ULUDAĞ MUHAMMET,GEMİ LOKMAN,ÇETİN REMZİ,DIŞPINAR DERYA , Place of Publication: American Journal of Engineering Research (AJER) , 2016

UluslararasıHakemliScholarÖzgün Makale

Efficiency of Sr Modification in Hypereutectic Al Si Alloys

ULUDAĞ MUHAMMET,GEMİ LOKMAN,DIŞPINAR DERYA , Place of Publication: International Journal of Scientific and Technical Research in Engineering , 2016

UluslararasıHakemliGoogle ScholarÖzgün Makale

Evaluation of the Effects of Rotary Degassing Process Variables on the Quality of A357 Aluminum Alloy Castings

MOSTAFAEI M,GHOBADI M,EISAABADI B GAHSEM,ULUDAĞ MUHAMMET,TİRYAKİOĞLU MURAT , Place of Publication: Metallurgical and Materials Transactions B , 2016

UluslararasıHakemliSCIÖzgün Makalehttp://link.springer.com/10.1007/s11663-016-0786-7

Investigation of the effect of carbon nanotube ratio on the wear behavior of carbon nanotube epoxy nanocomposites

YAZMAN ŞAKİR,GEMİ LOKMAN,ULUDAĞ MUHAMMET,DIŞPINAR DERYA , Place of Publication: International Journal of Enhanced Research in Science , 2015

UluslararasıHakemliER PUBLICATIONSÖzgün Makalehttp://www.erpublications.com/uploaded_files/download/download_01_08_2015_15_24_17.pdf

Mechanical properties and melt quality relationship of Sr modified Al 12Si alloy

ULUDAĞ MUHAMMET,UYANER MESUT,YILMAZ FEVZİ,DIŞPINAR DERYA , Place of Publication: Archives of Foundry Engineering , 2015

UluslararasıHakemliGoogle ScholarÖzgün Makalehttp://www.afe.polsl.pl/index.php/en/4236/mechanical-properties-and-melt-quality-relationship-of-sr-modified-al-12si-alloy.pdf

Experimental and Statistical Analysis of Effect of Si Modification and Grain Refinement on Tensile Properties of A356 Alloy

ULUDAĞ MUHAMMET , Place of Publication: Politeknik Dergisi , 2021

UlusalHakemliTR DİZİNÖzgün Makalehttps://dergipark.org.tr/tr/pub/politeknik

Investigation of the Relationship Between Casting Quality, Microstructure and Mechanical Properties in Al-18Si Alloy

ULUDAĞ MUHAMMET , Place of Publication: Uluslararası Muhendislik Arastirma ve Gelistirme Dergisi , 2018

UlusalHakemliTR DİZİNÖzgün Makalehttp://dergipark.gov.tr/doi/10.29137/umagd.419659

Etial 195 Alaşımında Sr Modifikasyonu Ve Tutma Süresinin Si Morfolojisi Ve Mekanik Özelliklere Etkisi

ULUDAĞ MUHAMMET,GEMİ LOKMAN,ERYILMAZ Muhammed Raşit,DIŞPINAR DERYA , Place of Publication: Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi , 2015

UlusalHakemligoogle scholarÖzgün Makale

Al Si Alaşimlarinda Si Morfolojisinin İşlenebilirliğe Etkisi

ULUDAĞ MUHAMMET,YAZMAN ŞAKİR,BAKIRCIOĞLU BARIŞ,DIŞPINAR DERYA , Place of Publication: Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi , 2015

UlusalHakemligoogle scholarÖzgün Makale