Erosion wear performance of borax filled novel hybrid composites by using the Taguchi experimental design

BAĞCI MEHMET, İMREK HÜSEYİN , Place of Publication: Industrial Lubrication and Tribology , 2016

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://dx.doi.org/10.1108/ilt-01-2015-0007

Modelling and optimisation of an 8 × 8 heavy duty vehicle's hydro-pneumatic suspension system

Küçük Kahraman, Yurt H. K., Arıkan K. Bilge, İMREK HÜSEYİN , Place of Publication: International Journal of Vehicle Design , 2016

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://dx.doi.org/10.1504/ijvd.2016.078772

Energy generation from weights of moving vehicles A case study at Alaeddin Keykubad Campus Konya Turkey

KHALFAN OMARI MASHI,İMREK HÜSEYİN , Place of Publication: Energy , 2015

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://linkinghub.elsevier.com/retrieve/pii/S0360544215005253

Optimization of Test Parameters That Influence Erosive Wear Behaviors of Glass Fiber Reinforced Epoxy Composites by Using the Taguchi Method

BAĞCI MEHMET,İMREK HÜSEYİN,KHALFAN OMARI MASHI , Place of Publication: Journal of Tribology , 2015

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://tribology.asmedigitalcollection.asme.org/article.aspx?doi=10.1115/1.4028226

Experimental investigation of wear behaviors of bronze and carbon reinforced polytetrafluoroethylene alloy pivot pin bearings

İMREK HÜSEYİN,DEMET SEYİT MEHMET , Place of Publication: Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology , 2014

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://pij.sagepub.com/lookup/doi/10.1177/1350650114542839

Solid particle erosion behaviour of glass mat based polyester laminate composite materials

BAĞCI MEHMET,İMREK HÜSEYİN,AKTAŞ ALAATTİN , Place of Publication: Journal of Thermoplastic Composite Materials , 2013

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://jtc.sagepub.com/cgi/doi/10.1177/0892705711429490

EFFECT OF TOOTH WIDTH MODIFICATION ON WEAR IN BRASS SPUR GEARS

İMREK HÜSEYİN,BEHİYE SÜRE , Place of Publication: JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION , 2013

UluslararasıHakemliSCI-ExpandedÖzgün Makale

Application of Taguchi method on optimization of testing parameters for erosion of glass fiber reinforced epoxy composite materials

BAĞCI MEHMET,İMREK HÜSEYİN , Place of Publication: Materials & Design , 2013

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://linkinghub.elsevier.com/retrieve/pii/S0261306912007820

Effect of longitudinal stress levels on sliding wear

İMREK HÜSEYİN, FIRAT VEYSEL, BAĞCI MEHMET , Place of Publication: Scientific Research and Essays , 2012

UluslararasıHakemliEI: Engineering Index Özgün Makale

Solid Particle Erosion as Influenced by Tensile Axial Loads

İMREK HÜSEYİN,BAĞCI MEHMET,KHALFAN OMARI MASHI , Place of Publication: Tribology Transactions , 2011

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://www.tandfonline.com/doi/abs/10.1080/10402004.2011.603459

Erosive Wear of Glass Fiber and B2O3 Reinforced Epoxy Composites

BAĞCI MEHMET,İMREK HÜSEYİN , Place of Publication: Advanced Materials Research , 2011

UluslararasıHakemliIndex Copernicus Journals Master List www.indexcopernicus.com.Özgün Makalehttp://www.scientific.net/AMR.264-265.1893

Solid particle erosion behaviour of glass fibre reinforced boric acid filled epoxy resin composites

BAĞCI MEHMET,İMREK HÜSEYİN , Place of Publication: Tribology International , 2011

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://linkinghub.elsevier.com/retrieve/pii/S0301679X11002052

Effects of Silicon Oxide Filler Material and Fibre Orientation on Erosive Wear of GF/EP Composites

BAĞCI MEHMET, İMREK HÜSEYİN, KHALFAN OMARI MASHI , Place of Publication: World Academy of Science, Engineering and Technology International Journal of Materials and Metallurgical Engineering , 2011

UluslararasıHakemliEI: Engineering Index Özgün Makale

Solid Particle Erosion Wear of GF EP Composites with Added Al 2 O 3

BAĞCI MEHMET,İMREK HÜSEYİN , Place of Publication: INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, PTS ONE AND TWO , 2010

UluslararasıHakemliAIP Conference ProceedingsÖzgün Makale

Examination of Pitting and Wear in Borided Carburized and Borocarburized AISI 8620 Gears

DÜZCÜKOĞLU HAYRETTİN,ÇALIK ADNAN,İMREK HÜSEYİN,KARAKAŞ MUSTAFA S , Place of Publication: Tribology Transactions , 2010

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://www.informaworld.com/openurl?genre=article&doi=10.1080/10402000903457458&magic=crossref||D404A21C5BB053405B1A640AFFD44AE3

Performance improvement method for Nylon 6 spur gears

İMREK HÜSEYİN , Place of Publication: Tribology International , 2009

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://linkinghub.elsevier.com/retrieve/pii/S0301679X08001941

Width modification for gears with low contact ratio

İMREK HÜSEYİN , Place of Publication: Meccanica , 2009

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://link.springer.com/10.1007/s11012-009-9220-4

Experimental and numerical failure analysis of pinned joints in composite materials

AKTAŞ ALAATTİN,İMREK HÜSEYİN,CUNEDİOĞLU YUSUF , Place of Publication: Composite Structures , 2009

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://linkinghub.elsevier.com/retrieve/pii/S026382230800319X

Investigation of influence of load and velocity on scoring of addendum modified gear tooth profiles

İMREK HÜSEYİN,ÜNÜVAR ALİ , Place of Publication: Mechanism and Machine Theory , 2009

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://linkinghub.elsevier.com/retrieve/pii/S0094114X08001389

Effect of sliding speed in a CuZn10 Brass Material on wear

BAĞCI MEHMET,İMREK HÜSEYİN , Place of Publication: JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION , 2009

UluslararasıHakemliSCI-ExpandedÖzgün Makale

Experimental investigation of effects of external loads on erosive wear

İMREK HÜSEYİN, BAĞCI MEHMET, KHALFAN OMARI MASHI , Place of Publication: Journal of Achievements in Materials and Manufacturing Engineering , 2009

UluslararasıHakemliEI: Engineering Index Özgün Makale

A new method for preventing premature pitting formation on spur gears

DÜZCÜKOĞLU HAYRETTİN,İMREK HÜSEYİN , Place of Publication: Engineering Fracture Mechanics , 2008

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://linkinghub.elsevier.com/retrieve/pii/S0013794408001458

Relation between wear and tooth width modification in spur gears

İMREK HÜSEYİN,DÜZCÜKOĞLU HAYRETTİN , Place of Publication: Wear , 2007

UluslararasıHakemliSCI-ExpandedÖzgün Makalehttp://linkinghub.elsevier.com/retrieve/pii/S0043164806002584

Metalik Malzemelerde Aşınma

İMREK HÜSEYİN, BAĞCI MEHMET , Place of Publication: Machinery Makine Teknolojileri , 2005

UlusalHakemliEndekste taranmıyorTeknik Not

Dövme Proses Hataları Ve Çözümleri

İMREK HÜSEYİN , Place of Publication: Mühendis ve Makina , 2002

UlusalHakemliTR DİZİNDerleme Makale

Düz Dişli Çarklarda Profil Kaydırma İşleminin Yenme Olayı Üzerine Etkisinin İncelenmesi

İMREK HÜSEYİN, ÜNÜVAR ALİ , Place of Publication: S.Ü. Müh.-Mim. Fak. Dergisi, , 1998

UlusalHakemliTR DİZİNÖzgün Makale